Danobat Saws Logo
Danobat Saws
iDS

HDS

DS

HV Gantry

CPI

Drill

VP Saws
 
<back
Danobat HV Gantry
The HV Range of Danobat saws feature twin Prismatic guide columns. The main prismatic guide column travels on linear rails and linear bearings. The support prismatic guide column travels on free rollers. The result is a torsion free travel throughout the sawing range.

The HV Range is available in capacities from 40 inch to 63 inch. The HV machines are for sawing in demanding applications such as die forging and heavy manufacturing operations.
The HV band saw range are available with either a Wagen Style Feed System or Twin Saw Heads for maximum efficiency.

The HV range can reduce further manufacturing time by allow the saw blade to cut either horizontally or vertically, thus a section of a large work piece is removed via sawing rather than machining.
Each machine can be equipped with the IntelliCut Software to increase parts per shift, decrease cutting cost and remove the operator from the decision making process regarding the use of the saw blade and the cutting rate.
Danobat CP Range of Heavy Duty Fully Automatic Band Saw Machines - HV Gantry
SPECIFICATIONS
Model G12.11 G15.15 G20.15 G20.20
Cutting
Capacity
round
43-1/2 in 59 in 59 in 78-3/4 in
Cutting
Capacity
square
47-1/2 x 43-1/2 in 59 x 59 in 78-3/4 x 59 in 78-3/4 x 78-3/4 in
Band
Length
41 ft 4 in 47 ft 5 in 50 ft 9 in 55 ft 10 in
Band
Width
3-1/8 in 3-1/8 in 3-1/8 in 3-1/8 in
Band
Thickness
0.063 in 0.063 in 0.063 in 0.063 in
Saw
Motor
Power
30 HP 30 HP 30 HP 30 HP
Hydraulic
Motor
10.5 HP 10.5 HP 10.5 HP 10.5 HP
Band
Speed
30-375 fpm 30-375 fpm 30-375 fpm 30-375 fpm

      Copyright © 2010 Pat Mooney Inc. All rights reserved.