Pat Mooney Saws | Danobat CP Transfer Saws

CP Semi

CP Automatic

CP Transfer

HV Gantry

CPI

Drill

VP Saws

<back

CP Range Transfer Saw Machines
The CP Range of Danobat saws feature twin Prismatic guide columns. The main prismatic guide column travels on linear rails and linear bearings. The support prismatic guide column travels on free rollers. The result is a torsion free travel throughout the sawing range.	The CP Transfer Range is available in capacities from 20 inch to 60 inch. The CP machines are for sawing in demanding applications such as die forging; steel production; and heavy manufacturing operations.

Each machine can be equipped with the IntelliCut Software to increase parts per shift, decrease cutting cost and remove the operator from the decision making process regarding the use of the saw blade and the cutting rate. The IntelliCut software will reduce cutting times and increase blade life.

FEATURES
•	Horizontal Cross Transfer to Load Parts in Auto Cycle
•	Power Roller Table and Length Stop to Advance the Cut Length
•	Pusher Length System to Eliminate Excess Remnant or Drop Ends
•	Out Feed Conveyor to Transport the Cut Parts

SPECIFICATIONS

Model	CP 1000TV	CP 13.11TV	CP 13.13TV	CP 1600TV
Cutting Capacity round	38.37 in 1000mm	43.30 in 1100mm	51.18 in 1300mm	62.99 in 1600mm
Cutting Capacity square	40.35 x 43.30 in 1025 x 1000mm	51.18 x 43.30 in 1300 x 1100mm	51.18 x 51.18 in 1300 x 1300mm	62.99 x 62.99 in 1600 x 1600mm
Band Sizes	410.03 x 3.14 in 10415 x 80 x 1.6mm	452.75 x 3.14 in 11500 x 80 x 1.6mm	485.43 x 3.14 in 12330 x 80 x 1.6mm	598.03 x 3.14 in 15190 x 80 x 1.6mm
Main Motor Power	12.24 HP 9 kW	14.96 HP 11 kW	24.48 HP 18 kW	24.48 HP 18 kW
Hydraulic Group Power	7.48 HP 5.5 kW	7.48 HP 5.5 kW	7.48 HP 5.5 kW	7.48 HP 5.5 kW
Band Speed	36.3 - 224.4 fpm 11 - 68 m/min	33 - 237.6 fpm 10 - 72 m/min	39.6 - 297 fpm 12 - 90 m/min	33 - 264 fpm 10 - 80 m/min